63 / 129
63
RDBT Series
ASHDB Series
Cabinet Dimensions: 7” x 6” x 10’
Maximum Length
Made in U.S.A.
Not suitable for residential
applications. 300 Watts Per Foot
Maximum. Pedestals included with
unit. Rounded enclosure with flat
top discharge. Special Build: consult
factory for lead time.
NOTE: RDBT-PD Series will permit a Thermostat mounted on one side and
a Disconnect on the other side. More or other controls require a 6” or 12”
control section. Typically, Thermostats are mounted on the left side of heater.
Control Sections will add to length of heater.
Cabinet Dimensions: 5-1/2” x 8”
thru 20” x 10’ Maximum Length.
Cannot be Anodized
Made in U.S.A.
Not suitable for residential applications.
500 Watts per foot maximum. 16 gauge
Steel enclosure, 18 gauge backplate.
Heights may vary from 8” up to 20”.
Bottom Intake / Top Discharge. Special
build - consult factory for lead time.
NOTE: ASHDB Series will permit a Thermostat mounted on one side and
a Disconnect on the other side, more or other controls require a 6” or 12”
control section. Typically, Thermostats are mounted on left side of heater.
Control Section will add to length of heater.
CB Series
NOTE: CB Series will
permit either a Thermostat
or a Disconnect on only
one side of the heater. More
or other controls require a
control section. Typically,
Thermostats are mounted
on the right side of heater.
Control Sections will add to
length of heater.
Cabinet Dimensions:
2-5/8” x 4-1/2” x 10’
Maximum Length
Made in U.S.A.
Not suitable for residential
applications. Bottom inlet
only. Built to order: consult
factory for lead time.
MFG MODEL NUMBER LENGTH COLOR AVAILABILITY
RDBT-PD-2
2’
Painted Bronze
RDBT-PD-3
3’
RDBT-PD-4
4’
RDBT-PD-5
5’
RDBT-PD-6
6’
RDBT-PD-7
7’
RDBT-PD-8
8’
RDBT-PD-9
9’
RDBT-PD-10
10’
Extended Enclosure
BLANK SECTIONS
RDBT-PD-100BS
1’
RDBT-PD-200BS
2’
RDBT-PD-300BS
3’
RDBT-PD-400BS
4’
RDBT-PD-500BS
5’
RDBT-PD-600BS
6’
RDBT-PD-700BS
7’
RDBT-PD-800BS
8’
RDBT-PD-900BS
9’
RDBT-PD-1000BS
10’
ACCESSORIES
COLOR AVAILABILITY
RDBT-PDIC / Inside Corner Section
Painted Bronze
90 - 180 Degrees
RDBT-PDOC / Outside Corner Section
180 - 270 Degrees - 6” longest side
RDBT-PDIECR/Inside Fitting Right End Cap
RDBT-PDIECL/Inside Fitting Left End Cap
3/4” Conduit Raceway (standard is 1/2”)
Mesh - 1/4” Wire Mesh under Grill
MFG MODEL / LENGTH WATTS/FT.
Color Availability
(heater & finished back)
ASHDB-2
to 250
Painted Bronze
2’
251-500
ASHDB-3
to 250
3’
251-500
ASHDB-4
to 250
4’
251-500
ASHDB-5
to 250
5’
251-500
ASHDB-6
to 250
6’
251-500
ASHDB-7
to 250
7’
251-500
ASHDB-8
to 250
8’
251-500
ASHDB-9
to 250
9’
251-500
ASHDB-10
to 250
10’
251-500
Extended Enclosure
(no color on finished back)
Blank Sections
ASHDB-8/20-100BS 1’
ASHDB-8/20-200BS 2’
ASHDB-8/20-300BS 3’
ASHDB-8/20-400BS 4’
ASHDB-8/20-500BS 5’
ASHDB-8/20-600BS 6’
ASHDB-8/20-700BS 7’
ASHDB-8/20-800BS 8’
ASHDB-8/20-900BS 9’
ASHDB-8/20-1000BS 10’
Accessories
Color Availability
ASHDB IC / Inside Corner Section
Painted Bronze
90 - 180 Degrees
ASHDB OC / Outside Corner Section
180 - 270 Degrees - 6” longest side
ASHDB ECR / Right End Cap
ASHDB ECL / Left End Cap
ASHDB SP / 1 1/2” Splice Plate
ASHDB WT / 2” - 6” Wall Trim
3/4” Conduit Raceway ( standard is 1/2”)
Mesh / 1/4” Wire Mesh under Grill
Pedestals - Specify 2” or 3”
See Chart for required amount per Heater
MFG MODEL
NUMBER LENGTH COLOR (HEATER&
FINISHEDBACK)
CB-2
2’
Painted Bronze
CB-3
3’
CB-4
4’
CB-5
5’
CB-6
6’
CB-7
7’
CB-8
8’
CB-9
9’
CB-10
10’
Extended Enclosure
(no color on finished back)
BLANK SECTIONS
CB-100BS
1’
CB-200BS
2’
CB-300BS
3’
CB-400BS
4’
CB-500BS
5’
CB-600BS
6’
CB-700BS
7’
CB-800BS
8’
CB-900BS
9’
CB-1000BS 10’
Accessories
Color Availability
CB IC / Inside Corner Section
Painted Bronze
90 - 180 Degrees
CB OC / Outside Corner Section
180 - 270 Degrees - 6” longest side
CB ECR / Right End Cap
CB ECL / Left End Cap
CB WT / Wall Trim 2” - 6”
CB SP / Splice Plate 1 1/2”
CB MF / Mullion Front up to 1’
1/2” Conduit Raceway
Mesh / 1/4” Wire Mesh under Grill
Pedestals - specify 2” or 3”
See Chart for required amount per Heater